Part Number Hot Search : 
P16NF06F C1641 MPC755CD MMSZ4V3 24300 AS105 4040E 4040E
Product Description
Full Text Search
 

To Download JTH1524D05 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 DC-DC
15 Watts JTH Series
* * * * * * * 4:1 Input Range 1500 VDC Isolation Efficiency up to 86%
xppower.com
-40 C to +100 C Operating Temperature Optional Remote On/Off Single & Dual Outputs Continuous Short Circuit Protection
Specification
Input
* 24 V (9-36 VDC) 48 V (18-72 VDC) Input Current * See table Input Filter * Pi network Input Reflected Ripple * 35 mA rms through 12 H inductor, 5 Hz to 20 MHz Input Surge * 24 V models 50 VDC for 100 ms 48 V models 100 VDC for 100 ms Input Voltage Range
General
Efficiency Isolation * See table * 1500 VDC Input to Output 1000 VDC Input to Case 1000 VDC Output to Case * 1200 pF typical * 300 kHz typical * >1.2 MHrs to MIL-STD-217F
Isolation Capacitance Switching Frequency MTBF
Environmental Output
Output Voltage Voltage Balance Minimum Load Line Regulation Load Regulation Setpoint Accuracy Start Up Rise Time Start Up Delay Ripple & Noise Transient Response Temperature Coefficient Overcurrent Protection Short Circuit Protection Remote On/Off * * * * * * * * * * * See table 1% No minimum load required 0.5% 0.5% 10-100% load, 1.0% below 10% load 1% <20 ms <10 ms 75 mV pk-pk 20 MHz BW 3% max deviation, recovery to within 1% in 200 s for 25% load change 0.02%/C Operating Temperature * -40 C to +100 C, derate from 100% load at +60 C to 0% load at +100 C Case Temperature * 100 C max Cooling * Convection-cooled Operating Humidity * Up to 95% RH, non-condensing Storage Temperature * -40 C to +125 C
EMC
Emissions * EN55022 Class A conducted & radiated with external components, see application note. * EN61000-4-2, 8 kV air discharge Perf Criteria A, 4 kV contact discharge Perf Criteria A * EN61000-4-3, Level 2 3 V/m Perf Criteria A * EN61000-4-4, Level 1 Perf Criteria B * EN61000-4-6, 3 V Perf Criteria A * EN61000-4-8, 1 A/m Perf Criteria A
ESD Immunity
Radiated Immunity EFT/Burst Conducted Immunity Magnetic Field
* 140% typical of full load at nominal input * Trip & restart (Hiccup mode), auto recovery * Optional - see Application Note. On = +2.5 to +5.5 VDC or Open circuit Off = -0.7 to +0.8 VDC or short circuit
DC-DC
Models and Ratings
Input Voltage Range Output Voltage 3.3 V 5.0 V 12.0 V 15.0 V 5.0 V 12.0 V 15.0 V 3.3 V 5.0 V 12.0 V 15.0 V 5.0 V 12.0 V 15.0 V Output Current 3000 mA 3000 mA 1250 mA 1000 mA 1500 mA 625 mA 500 mA 3000 mA 3000 mA 1250 mA 1000 mA 1500 mA 625 mA 500 mA Input Current(1) No Load Full Load 25 mA 515 mA 25 mA 753 mA 25 mA 735 mA 25 mA 726 mA 25 mA 753 mA 25 mA 735 mA 25 mA 726 mA 20 mA 257 mA 20 mA 376 mA 20 mA 367 mA 20 mA 363 mA 20 mA 376 mA 20 mA 367 mA 20 mA 363 mA Efficiency 80% 83% 85% 86% 83% 85% 86% 80% 83% 85% 86% 83% 85% 86% Max Capacitive Load 3300 F 3300 F 680 F 470 F 2200 F 470 F 330 F 3300 F 3300 F 680 F 470 F 2200 F 470 F 330 F
JTH
Model Number(2) JTH1524S3V3^ JTH1524S05^ JTH1524S12^ JTH1524S15^ JTH1524D05^ JTH1524D12^ JTH1524D15^ JTH1548S3V3^ JTH1548S05^ JTH1548S12^ JTH1548S15^ JTH1548D05^ JTH1548D12^ JTH1548D15^
9-36 VDC
18-72 VDC
Notes
1. Measured at nominal input voltage. 2. For optional Remote On/Off. add suffix `-R' to model number. ^ Available from Newark. See pages 207-208.
Mechanical Details
All dimensions are in inches (mm). Tolerance x.xx = 0.10 (0.25). Weight 0.07 lbs (30 g).
0.10 (2.54) 0.40 0.40 (10.16) (10.16) 0.10 (2.54) DIA. 0.04 (1.00) 0.60 (15.24)
3 4 5
1.00 (25.40)
0.40 (10.16)
2.00 (50.80)
0.80 (20.32)
Bottom View
1 2 6
Pin 1 2 3 4 5 6*
PIN CONNECTIONS Single Dual +Vin +Vin -Vin -Vin +Vout +Vout No pin Common -Vout -Vout ROF* ROF*
0.60 (15.24) 0.20 (5.08) Min
* Pin 6 only present with optional Remote On/Off
0.40 0.40 (10.16) 0.20 (10.16) (5.08)
Application Notes
Derating Curve Optional Remote On/Off On = +2.5 to +5.5 VDC on pin 6 WRT pin 2 or open circuit Off = -0.7 to +0.8 VDC on pin 6 WRT pin 2 or short circuit pin 2 & 6
100
Output Power (%)
Input current is typically 2.5 mA when output is remotely switched off.
75
Input Filter
50
+Vin L
25
C1 C2
L = 12 H C1 = 47 F C2 = 33 F
-Vin
-40
-20
0
20
40
60
80
100
120
Ambient Temperature (C)
27-Nov-08


▲Up To Search▲   

 
Price & Availability of JTH1524D05

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X